Due to increased order volume please allow longer than normal production times for all machinery


The Pocket Sidewall Remover model PSR1-1 is as small as its name suggests.  This is our entry level sidewall remover designed for any size tire shop or any startup tire hauling/recycling business!

Operating the Pocket SR1-1 is as simple as 1-2-3:

  1. With the machine powered ON, place the tire over the cutting blade.
  2. Push the foot pedal to the floor and remove the 1st sidewall of the tire.
  3. Remove the tire and flip it around to remove the 2nd sidewall.

Production rate for this machine is 1.5 tires per minute.  Every bearing on the machine is sealed from water and debris, and maintenance is extremely simple.  The motor is fully enclosed, and directly mounted to the gearbox, so there are no chains or sprockets that need constant lubrication.

The cutting blade is made of special hardened steel, and machined to a knife edge.  The drive wheels and blades lasts 10’s of thousands of tires before they will need to be replaced and can be ordered through us.  Please visit our parts page for all replacement parts associated with this machine.

Function:

Remove Sidewalls from Whole Tires

  • Reduces volume
  • Pre-process before chipping/shredding
  • Make recycled products from the pieces
  • Eliminate water retention

 

Input: Whole Tires
  • Whole tires from passenger cars and light trucks.
  • Minimum rim diameter: 13" (33cm)
  • Maximum tire diameter: 32" (81cm)

 

Output: Sidewalls + Tread
  • 2 Sidewalls per tire.
  • 1 Tread Ring per tire.

Steel beads can be removed from sidewalls with rubber casing or completely extracted to create 100% steel-free products. Tread Rings can be cut to create a strip that further reduces volume and allows for more processing options.

 

Production Rate: 2+ Ton/hr
  • Average 90 tires per hour
Size & Weight:
  • Floor space: 30” x 33” (76cm x 84cm)
  • Weight: 167lbs (76Kg)
Cutting surface:

 

Electrical:
  • 1.5 HP (1.1kW) Single-Phase Leeson TEFC Motor
  • 110v @ 60Hz. International customers, please call to discuss electrical needs.
  • 17 Amp Peak Draw

EECO has collaborated with 2 lending companies to provide financing for our customers, depending on their needs. For amounts of $500 - $20,000, a Clicklease financing application is available on every machine page. For amounts over $20,000, Partners Capital Group has a simple and straightforward application that can be found here: https://www.flexiblefinanceoptions.com/eaeco

Please keep in mind that EECO has no part in the approval process or setting interest rates. Feel free to use your own financer if a better rate is available. DO NOT SEND FINANCING APPLICATIONS TO EECO.

DUE TO INCREASED ORDER VOLUME PLEASE ALLOW LONGER THAN NORMAL PRODUCTION TIMES FOR ALL MACHINERY