TC2-1 Tread Cutter
Move your mouse over image to enlarge
TC2-1 Tread Cutter TC2-1 Tread Cutter TC2-1 Tread Cutter

TC2-1 Tread Cutter

Motor Type

Category: Stage 2, TC

Type: Tire Cutting Machine


The TC2-1 Tread Cutter cross-cuts tire treads after the sidewalls have been removed. Simply feed the tread into the cutting wheels, the wheels will pull most treads through as they cut. The (standard) feeder jaw helps to safely load treads if they are not pulled in by the cutting wheels, just lift the handles.

The machine should remain powered-on between consecutive cuts.

The production rate of the tread cutter matches that of the sidewall remover with a time per cut of 2 to 3 seconds. The 6" Cutting Blade for TC2-1 Tread Cutter'>hardened steel cutting discs will cut 100,000 treads. The only maintenance required is to keep the drive chain lubricated and adjusted.


FUNCTION:

Cross-cut passenger vehicle tires

  • Reduces volume
  • Pre-process prior to chipping/shredding
  • Make recycled products from the pieces

 

INPUT: TREAD RINGS
  • Tread Rings from passenger cars and light trucks.

 

OUTPUT: TREAD BANDS
  • Tread Bands

 

PRODUCTION RATE: 1 TON/HR
  • Average 180 tires per hour

 

SIZE & WEIGHT:
  • Floor space: 33” x 33” (84cm x 84cm)
  • Weight: 250lbs (114Kg)

 

CUTTING SURFACE:

 

ELECTRICAL:
  • 2 HP Single-Phase Leeson TEFC Motor
  • 110v @ 60Hz Standard, 220v @ 50Hz Conversion available.
  • 13 Amp Peak Draw

EECO has collaborated with Direct Capital to provide financing for our customers.
Customers can fill out an online application, call Geoff Boyd at (603) 433-9458, or fax a completed Financing Application to (603) 433-9781. Please keep in mind that EECO has no part in the approval process or setting interest rates. Feel free to use your own financer if a better rate is available. DO NOT SEND FINANCING APPLICATIONS TO EECO.

Apply Online

Download Fax Application Download a Faxable Application