PSR1-1 Pocket Sidewall Remover
Move your mouse over image to enlarge
PSR1-1 Pocket Sidewall Remover PSR1-1 Pocket Sidewall Remover

PSR1-1 Pocket Sidewall Remover

Motor Type
Action Type

Category: PSR, Stage 1

Type: Tire Cutting Machine


The Pocket Sidewall Remover model PSR1-1 is as small as its name suggests.  This is our entry level sidewall remover designed for any size tire shop or any startup tire hauling/recycling business!

Operating the Pocket SR1-1 is as simple as 1-2-3:

  1. With the machine powered ON, place the tire over the cutting blade.
  2. Push the foot pedal to the floor and remove the 1st sidewall of the tire.
  3. Remove the tire and flip it around to remove the 2nd sidewall.

Production rate for this machine is 1.5 tires per minute.  Every bearing on the machine is sealed from water and debris, and maintenance is extremely simple.  The motor is fully enclosed, and directly mounted to the gearbox, so there are no chains or sprockets that need constant lubrication.

The cutting blade is made of special hardened steel, and machined to a knife edge.  The drive wheels and blades lasts 10’s of thousands of tires before they will need to be replaced and can be ordered through us.  Please visit our parts page for all replacement parts associated with this machine.

Function:

Remove Sidewalls from Whole Tires

  • Reduces volume
  • Pre-process before chipping/shredding
  • Make recycled products from the pieces
  • Eliminate water retention

 

Input: Whole Tires
  • Whole tires from passenger cars and light trucks.
  • Minimum rim diameter: 13" (33cm)
  • Maximum tire diameter: 32" (81cm)

 

Output: Sidewalls + Tread
  • 2 Sidewalls per tire.
  • 1 Tread Ring per tire.

Steel beads can be removed from sidewalls with rubber casing or completely extracted to create 100% steel-free products. Tread Rings can be cut to create a strip that further reduces volume and allows for more processing options.

 

Production Rate: 2+ Ton/hr
  • Average 180 tires per hour
Size & Weight:
  • Floor space: 30” x 33” (76cm x 84cm)
  • Weight: 167lbs (76Kg)
Cutting surface:

 

Electrical:
  • 1.5 HP (1.1kW) Single-Phase Leeson TEFC Motor
  • 110v @ 60Hz Standard, 220v @ 50Hz Conversion available.
  • 17 Amp Peak Draw

EECO has collaborated with Direct Capital to provide financing for our customers.
Customers can fill out an online application, call Geoff Boyd at (603) 433-9458, or fax a completed Financing Application to (603) 433-9781. Please keep in mind that EECO has no part in the approval process or setting interest rates. Feel free to use your own financer if a better rate is available. DO NOT SEND FINANCING APPLICATIONS TO EECO.

Apply Online

Download Fax Application Download a Faxable Application