Due to increased order volume please allow longer than normal production times for all machinery

TCBR1-2 Tire Carcass Bead Remover
Move your mouse over image to enlarge
TCBR1-2 Tire Carcass Bead Remover TCBR1-2 Tire Carcass Bead Remover TCBR1-2 Tire Carcass Bead Remover TCBR1-2 Tire Carcass Bead Remover TCBR1-2 Tire Carcass Bead Remover TCBR1-2 Tire Carcass Bead Remover

The TCBR1-2 Tire Carcass Bead Remover is designed to remove beads from uncured tires (also referred to as green tires, first build, or second build) by making an incision with a utility blade approximately 1 inch from the inside diameter of the bead. When the cut is complete, the activation button is released, and the pieces can be removed.

  1. Loosen the two blade holder thumbscrews.
  2. Slide out the worn blade.
  3. Flip the blade or slide in a replacement.
  4. Retighten the two blade holder thumbscrews. 

The production rate averages at four sidewalls per minute. The blades are standard Extra Heavy Duty Utility Blades. Blade life is approximately 400-600 sidewalls. The blades can be changed in a matter of seconds; simply loosen two bolts, slide out the old blade, slide in a new blade, then retighten the bolts. The only maintenance required is to lubricate the drive chain and several grease fittings regularly. All parts are available from EECO, however, most of the common wear parts (sprockets, chain, bearings, etc.) are standard off-the-shelf parts and are typically available locally which allows for quick repairs. Buy a tire carcass bead remover from EECO today!

Function:

Remove steel bead from uncured tires.

  • Pre-process before chipping/shredding
  • Reprocess uncured rubber

 

Input: Whole Uncured Tires
  • Whole uncured/green/first build/second build tires.
  • Sidewalls from passenger cars and light trucks.
  • Minimum rim diameter: 13" (33cm)
  • Maximum rim diameter: 20" (51cm)

 

Output: Steel-Free Tire Carcass + Steel Bead
  • 100% steel-free tire carcass.
  • 1 Steel Bead, with rubber casing.

 

Production Rate:
  • Average 360 sidewalls per hour

 

Size & Weight:
  • Floor space: 33” x 33” (84cm x 84cm)
  • Weight: 325lbs (114Kg)

 

Cutting surface:

 

Electrical:
  • 1 HP Single-Phase Leeson TEFC Motor
  • 110v @ 60Hz. International customers, please call to discuss electrical needs.
  • 13 Amp Peak Draw
  • Requires plug for local electrical power, sold separately.

 

Compressed Air:
  • 100PSI (7 bar) @ 3-5CFM (142L/m)
  • Requires 1/4 female NPT quick disconnect.

EECO has collaborated with 2 lending companies to provide financing for our customers, depending on their needs. For amounts of $500 - $20,000, a Clicklease financing application is available on every machine page. For amounts over $20,000, Partners Capital Group has a simple and straightforward application that can be found here: https://www.flexiblefinanceoptions.com/eaeco

Please keep in mind that EECO has no part in the approval process or setting interest rates. Feel free to use your own financer if a better rate is available. DO NOT SEND FINANCING APPLICATIONS TO EECO.