Due to increased order volume please allow longer than normal production times for all machinery

T3C5-1 Truck Tire Tread Cutter
Move your mouse over image to enlarge
T3C5-1 Truck Tire Tread Cutter T3C5-1 Truck Tire Tread Cutter

The Truck Tire Tread Cutter is very similar in design to our smaller Tread Cutter. With a heavier frame, a stronger gearbox, and a 5HP 220V Leeson motor; this machine will cut through any passenger, light-truck, or any tread up to 1.5 inches thick!  Our new model cuts through the tread after the sidewalls have been removed from truck tires, passenger car tires, aircraft tires, and super single tires.

Simply feed the tread into the cutting wheels; the wheels will pull the tread through as they cut. The production rate of the tread cutter matches that of the Truck Tire Sidewall Remover with a time per cut of 3 to 4 seconds. The 8" Cutting Blade for T3C5-1 Truck Tire Tread Cutter'>hardened steel cutting discs will cut 100,000 treads. The only maintenance required is to keep the drive chain lubricated and the belts adjusted.


Cross-cut passenger vehicle tires

  • Reduces volume
  • Pre-process before chipping/shredding
  • Make recycled products from the pieces


  • Treads from passenger car, light truck, truck, aircraft, and super single tires.


  • Tread Bands


  • Average 80 tires per hour


  • Floor space: 33” x 33” (84cm x 84cm)
  • Weight: 450lbs (114Kg)




  • 5 HP Single-Phase Leeson TEFC Motor
  • 220v @ 60Hz. International customers, please call to discuss electrical needs.
  • 25 Amp Peak Draw

EECO has collaborated with 2 lending companies to provide financing for our customers, depending on their needs. For amounts of $500 - $20,000, a Clicklease financing application is available on every machine page. For amounts over $20,000, Partners Capital Group has a simple and straightforward application that can be found here: https://www.flexiblefinanceoptions.com/eaeco

Please keep in mind that EECO has no part in the approval process or setting interest rates. Feel free to use your own financer if a better rate is available. DO NOT SEND FINANCING APPLICATIONS TO EECO.