SC15-1 Sidewall Chipper
Move your mouse over image to enlarge
SC15-1 Sidewall Chipper 3/8" - 3/4" Rubber Mulch Sidewall Chipper full setup with Elevator Bucket Conveyor, Sorting Table, and Super Sacks Plain 3/8" - 3/4" Rubber Mulch before coloring. Red 3/8" - 3/4" Rubber Mulch, US Dime for scale.

SC15-1 Sidewall Chipper


Category: SC, Stage 3

Type: Tire Cutting Machine


The SC15-1 Sidewall Chipper makes rubber chips from 100% steel-free sidewalls at a rate of 1000lbs/hr (454Kg / 250 Sidewalls). It was designed to work in series or parallel with a Sidewall Remover and Bead Wire Remover. The mulch it produces can be 100% free of steel and wire and sold as a commodity (used for landscaping, molded rubber products, etc.)

This machine requires a short startup operation before use.

  1. Twist and release the emergency stop, a green light will indicate the machine is ready to be started.
  2. Turn the machine to the "ON" position.
Operation is simple:
  1. The SC15-1 features a sidewall cutter that is generally necessary to cut the sidewalls before being fed into the machine.
  2. Feed the sidewall into the top of the machine.
  3. Repeat as necessary.

    The only maintenance required is to regularly lubricate the drive chain and several grease fittings. Most of the common wear parts (sprockets, chain, bearings, etc.) are standard "off the shelf" parts and available locally; all parts are available from EECO.

    Function:

    Produce rubber mulch from steel-free sidewalls.

    • Produce 100% steel free products from the pieces

     

    Input: Sidewalls
    • Steel-free Sidewalls from passenger cars and light trucks.

     

    Output: Rubber Mulch + Crumb Rubber
    • +/-90% Rubber chips ranging from 3/8" to 3/4"
    • +/-5% Rubber chips ranging from 1/4" to 3/8"
    • +/-5% Rubber crumb less than 1/4".

     

    Production Rate: 1000 Lbs/hr (455Kg)
    • Average 400 sidewalls per hour

     

    Size & Weight:
    • Floor space: ~40” x 40” (1m x 1m)
    • Note: regular operation of this machine requires material handling equipment, total footprint including Elevator Bucket Conveyor, Sorting Table, Super Sacks, and Super Sack Stands is ~10'x10' (3m x 3m) and requires at least 10' of vertical clearance.
    • Weight: 

     

    Cutting surface:
    • Slicer
    • Chipper

     

    Electrical:
    • 3-5HP Single-Phase Leeson TEFC Motor
    • 220v @ 60Hz Standard, 220v @ 50Hz Conversion available.
    • 100 Amp Peak Draw
    • Requires plug for local electrical power, sold separately.
    Ancillary Equipment:
    • Elevator Bucket Conveyor, transports rubber mulch from ground level to the sorting table.
    • Sorting Table, sorts rubber chips to 3 size, 
    • Super Sack

     

    Coming Soon.

    EECO has collaborated with Direct Capital to provide financing for our customers.
    Customers can fill out an online application, call Geoff Boyd at (603) 433-9458, or fax a completed Financing Application to (603) 433-9781. Please keep in mind that EECO has no part in the approval process or setting interest rates. Feel free to use your own financer if a better rate is available. DO NOT SEND FINANCING APPLICATIONS TO EECO.

    Apply Online

    Download Fax Application Download a Faxable Application