Due to increased order volume please allow longer than normal production times for all machinery

SC15-1 Tire Sidewall Chipper
Move your mouse over image to enlarge
SC15-1 Tire Sidewall Chipper 3/8" - 3/4" Rubber Mulch Sidewall Chipper full setup with Elevator Bucket Conveyor, Sorting Table, and Super Sacks Plain 3/8" - 3/4" Rubber Mulch before coloring. Red 3/8" - 3/4" Rubber Mulch, US Dime for scale.

SC15-1 Tire Sidewall Chipper

International Prices May Vary

Category: SC, Stage 3

Type: Tire Cutting Machine

The SC15-1 Sidewall Chipper makes rubber chips from 100% steel-free sidewalls at a rate of 1,000 pounds per hour (454kg/250 sidewalls). It was designed to work in series or parallel with a Sidewall Remover and Bead Wire Remover. The mulch it produces can be 100% free of steel and wire and sold as a commodity (used for landscaping, molded rubber products, etc.)

This machine requires a short startup operation before use.

  1. Twist and release the emergency stop; a green light will indicate the machine is ready to be started.
  2. Turn the machine to the "on” position.
Operation is simple:
  1. The SC15-1 features a sidewall cutter that is generally necessary to cut the sidewalls before being fed into the machine.
  2. Feed the sidewall into the top of the machine.
  3. Repeat as necessary.

    The only maintenance required is to regularly lubricate the drive chain and several grease fittings. Most of the common wear parts (sprockets, chain, bearings, etc.) are standard off-the-shelf parts and available locally; all parts are available from EECO. Buy your tire sidewall chipper from EECO today!


    Produce rubber mulch from steel-free sidewalls.

    • Produce 100% steel free products from the pieces


    Input: Sidewalls
    • Steel-free Sidewalls from passenger cars and light trucks.


    Output: Rubber Mulch + Crumb Rubber
    • +/-90% Rubber chips ranging from 3/8" to 3/4"
    • +/-5% Rubber chips ranging from 1/4" to 3/8"
    • +/-5% Rubber crumb less than 1/4".


    Production Rate: 1000 Lbs/hr (455Kg)
    • Average 400 sidewalls per hour


    Size & Weight:
    • Floor space: ~40” x 40” (1m x 1m)
    • Note: regular operation of this machine requires material handling equipment, total footprint including Elevator Bucket Conveyor, Sorting Table, Super Sacks, and Super Sack Stands is ~10'x10' (3m x 3m) and requires at least 10' of vertical clearance.
    • Weight: 1625lbs (737kg)


    Cutting surface:
    • Slicer
    • Chipper


    • 3-5HP Single-Phase Leeson TEFC Motor
    • 220v @ 60Hz. International customers, please call to discuss electrical needs.
    • 100 Amp Peak Draw
    • Requires plug for local electrical power, sold separately.
    Ancillary Equipment:
    • Elevator Bucket Conveyor, transports rubber mulch from ground level to the sorting table.
    • Sorting Table, sorts rubber chips to 3 size, 
    • Super Sack

    EECO has collaborated with 2 lending companies to provide financing for our customers, depending on their needs. For amounts of $500 - $20,000, a Clicklease financing application is available on every machine page. For amounts over $20,000, Partners Capital Group has a simple and straightforward application that can be found here: https://www.flexiblefinanceoptions.com/eaeco

    Please keep in mind that EECO has no part in the approval process or setting interest rates. Feel free to use your own financer if a better rate is available. DO NOT SEND FINANCING APPLICATIONS TO EECO.